Our second-hand machines – as good as new!
Our used machines are modernized by our qualified employees and their decades of experience in mechanical engineering. Components are usually completely dismantled, cleaned, and repainted as required.
The interior gets a “makeover” treatment. Wear parts, guide elements, fluid lines, sensors and cables in the machine area are replaced, working and milling spindles are overhauled in proven manufacturer quality, and the control system is upgraded to the state of the art.
Here you'll learn more about our machine refit:
https://www.index-werke.de/de/dienstleistungen/maschinenservice/refit/
Repurchase of used machines
We are also interested in repurchasing your used INDEX or TRAUB machine.
This applies in particular to machines built after 1995.
Just give us a call!
Refit-Team
+49 (0)711 3191-9612
Multi-spindle automatics - INDEX MS25
Machine number: MS2502120
Year of manufacture: 1978
Main drive:
Power (at 50 Hz) 15 kW
Speed (at 50 Hz) 1450 rpm
Immediately available!
Turning Milling-Center INDEX R200
Machine number: 480004
Year of manufacture: 2008
Main spindle: max. d=65 mm, C axis
Counter spindle: max. d=65mm, C axis
Tool carrier 1: X/Y/B axis, Motor milling spindle (max. 18.000 rpm)
Tool carrier 2: Y/B axis, Motor milling spindle (max. 18.000 rpm)
Control: INDEX C200-4D SolutionLine
Turn-mill center - INDEX G200
Machine number: 510175
Year of manufacture: 1995
Main spindle: max. d=60 mm, C axis
Counter spindle: max. d=60mm, C axis
Tool carrier 1: X/Y/Z/B axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4
Turn-mill center - INDEX G200
Machine number: 510246
Year of manufacture: 1995
Main spindle: max. d=60 mm, C axis
Counter spindle: max. d=60mm, C axis
Tool carrier 1: X/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4
Turn-mill center - INDEX G200
Machine number: 10810100
Year of manufacture: 05/2019
Main spindle: max. d=65 mm, C axis
Counter spindle: max. d=65 mm, C axis
Tool carrier 1: X/Y/Z/B axes
Tool carrier 2: X/Y/Z axes
Tool carrier 3:X/Y/Z axes
Turn-mill center - INDEX G200
Machine number: 511771
Year of manufacture: 2005
Main spindle: D65mm, C-axis
Counter spindle: D65mm, C-axis
Tool carrier 1: X/Y/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D
Turn-mill center - INDEX G300
Machine number: 500068
Year of manufacture: 1995
Main spindle: D90mm, C-axis
Counter spindle: D65mm, C-axis
Tool carrier 1: X/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4
TRAUB TNK36
Machine number: 7100354
Year of manufacture: 2002
Tool carrier 1: X1/Z1- axis (without Y- axis), with individual drive
X3 slide: X3 cross axis for front working attachment/counter spindle
Front working attachment: Front working attachment, 5 tools and Z3 slide (without tool drive)
Back working attachment: Rear end machining unit (5 tools) including X4/Y4 axes
Control: TRAUB TX8i
Sliding headstock lathes - TRAUB TNL12
Machine number: 6000194
Year of manufacture: 1999
Main spindle: max. d=12.7mm, C axis
Counter spindle: max. d=12.7mm, C axis
Tool carrier 1: X/Y axis with tool drive
Tool carrier 2: X/Z axis with tool drive
Back working attachment: X axis with tool drive
Front working attachment: X-Z axis with tool drive
Control: TRAUB TX8I
TRAUB TNC65/42
Machine number: 7041098
Year of manufacture: 2004
Main spindle: max. d=65 mm, C axis
Counter spindle: max. d=42 mm, C axis
Tool carrier 1: X/Z/Y axis
Tool carrier 2 : X/Z axis
Control: TRAUB TX8H